📞 +33 (0)1 60 24 40 45 ✉️ contact@involtec.com Le Châtelet-en-Brie (77) — France
FREN

INVOLTEC practical guides

Find INVOLTEC’s practical guides and news on overwrapping, pouch packing, secondary packaging and production line traceability. The INVOLTEC Practical guides are a numbered collection of 24 titles, written by Frédéric Bussemey, with a new article every three to four weeks.

Featured · Guide no. 2

Overwrapping in cosmetics and perfumery: the constraints that make the difference

Gift boxes, limited editions, film finish: the specific demands of luxury and perfumery.

Read the guide →

The INVOLTEC Practical guides

Guide no. 1
25 August 2026

Overwrapping machines: the criteria that really make the difference

Output, price, footprint: three criteria that are not enough. What determines real performance five years on.

Read the article →
Guide no. 2
2 August 2026

Overwrapping in cosmetics and perfumery: the constraints that make the difference

Gift boxes, limited editions, film finish: the specific demands of luxury and perfumery.

Read the article →
Guide no. 3
2 August 2026

Pharmaceutical packaging: tamper evidence, serialisation and traceability

Tamper evidence, serialisation, aggregation, qualification: what the regulations actually require of a line.

Read the article →
Guide no. 4
2 August 2026

Food and confectionery: hygiene, high output and seasonality

Very high output and seasonal peaks: how to size a line without over-investing.

Read the article →
Guide no. 5
2 August 2026

How to choose your overwrapping machine: a four-question method

Format range, real output, number of SKUs, acquisition method: the scoping method.

Read the article →
Guide no. 6
2 August 2026

Overwrapping and packaging materials

PP, BOPP, cellulose, heat-sealable paper, 100% paper: what each material changes on the machine.

Read the article →
Guide no. 7
2 August 2026

Preventive maintenance of an overwrapping machine: improving your OEE for the long term

Maintenance levels, the parts to keep in stock and the operator’s decisive role.

Read the article →
Guide no. 8
2 August 2026

Overwrapping machine format changeover: reducing downtime without losing quality

Adjustment or dedicated tooling, change parts, SMED: where time is really lost.

Read the article →
Guide no. 9
2 August 2026

Installing and commissioning an overwrapping machine: getting the start-up right

What to prepare before delivery, and the documents to obtain before final acceptance.

Read the article →
Guide no. 10
2 August 2026

Fillers and pouch machines: sizing your dosing system correctly

Auger, volumetric cups, piston: it is the filler, not the pouch machine, that determines compliance.

Read the article →
Guide no. 11
25 August 2026

Overwrapping machines with adjustable consoles: a good idea on paper only?

Film tension, repeatability, high output: why luxury and pharma choose dedicated tooling.

Read the article →
Guide no. 14
25 August 2026

PPWR: what the European packaging regulation changes for your lines

Regulation (EU) 2025/40: timetable, minimisation, recyclability and the consequences for an existing line.

Read the article →
Guide no. 15
15 October 2026

Machinery Regulation (EU) 2023/1230: what changes on 20 January 2027

CE marking, partly completed machinery, assembled lines: what buyers need to check right now.

Read the article →
Guide no. 18
9 April 2026

New, used or rental overwrapping machine: how do you choose the right acquisition method?

New, used or rental: how to choose the acquisition method for an overwrapping machine according to how long you need it, your specifications and the total cost.

Read the article →

Coming soon

These guides have been written; they will be published as they pass technical review.

Guide no. 16
Coming soon

Retrofit or replacement: when to modernise an overwrapping machine rather than replace it

Obsolete PLC, unobtainable parts, outdated HMI: how to compare the two scenarios.

Guide no. 17
Coming soon

Reducing material consumption: web width, thickness and waste rate

Where waste really comes from on a line, how to measure it and where to start.

Guide no. 19
Coming soon

Running demo cartons and sales cartons through without overwrapping them: pass-through tooling

Demo cartons and sales cartons without film: jams, marking, wear, and what pass-through tooling changes.

Guide no. 20
Coming soon

Gift boxes and variable geometries: the quick-fit lower bridge

Gift boxes of variable height: the role of the lower bridge, brush or rigid, in longitudinal sealing.

Guide no. 21
Coming soon

Irregular longitudinal seals: the piano-type sealer

Bell-lid boxes, wrapped boxes: why a continuous bar does not seal everywhere, and the principle of the piano-type (segmented) sealer.

Guide no. 22
Coming soon

Overwrapping a sleeved product: hook pushers and grooved bridges

Sleeved products: why the sleeve separates when pushed, and how hook pushers and grooved bridges hold it in place.

Guide no. 23
Coming soon

Side sealing of gift boxes: custom sealing pads

Non-flat side faces: how a custom pad seals X-folds, and what to supply for its design.

Guide no. 24
Coming soon

Sharing tooling between an H125 and an H100: the compatible console

An H100 + H125 fleet: how a console makes H100 tooling usable on the H125 and frees up capacity.