📞 +33 (0)1 60 24 40 45 ✉️ contact@involtec.com Le Châtelet-en-Brie (77) — France
FREN

Our services

After-sales service & maintenance

INVOLTEC provides after-sales service and maintenance for the entire installed base of machines at its customers’ sites: MARDEN EDWARDS overwrapping machines, EFFYTEC horizontal form-fill-seal machines, Sollas machines and DM PACK lines.

Our interventions

Sollas overwrapping machine being overhauled in the INVOLTEC workshop at Le Châtelet-en-Brie
Photo — An overwrapping machine being overhauled in our workshop at Le Châtelet-en-Brie.

Breakdown repair

On site or remotely (diagnosis by phone / video call) to minimise production stoppages.

Preventive servicing

Scheduled visits to anticipate wear and keep machines running reliably day to day.

Parts & format changeover

Supply and fitting of wear parts and change parts, adjustments during batch changeovers.

Workshop refurbishment

In our workshop in Le Châtelet-en-Brie, we carry out the general refurbishment of your machines: dismantling, inspection, replacement of worn parts, adjustment and testing before they return to your line.

Custom adaptations and engineering studies

For a specific product, format or constraint, we design and build the adaptations required: custom tooling and change parts, machine modifications, and engineering studies based on your specifications and samples.

Standard or tailored maintenance contracts

INVOLTEC offers two types of maintenance contract, matched to the level of service required:

Standard contract

Scheduled preventive visits, priority call-outs and preferential rates on parts: a turnkey package to keep your machines running reliably day to day.

Tailored contract

Built with you around your production output, the criticality of your machines and your specific constraints (on-call service, guaranteed response time, dedicated stock of critical parts...) — for sites that require an enhanced level of service.

An INVOLTEC technician reviews your machine fleet and production context with you to propose the most suitable package.

Guaranteed response time

The guaranteed response time is agreed with the customer according to their needs and the criticality of their machines: the shorter the guaranteed time, the higher the contract level — and its cost. INVOLTEC after-sales contracts apply across our entire service area. The contract term is set according to what the customer defined when it was drawn up.

Diagram: two machines, one with rare but long breakdowns, the other with frequent but short stoppages
Diagram — What counts is cumulative downtime: hence the value of a short response time.

Training — Qualiopi certification

“The quality certification was issued for the following category: training activities.” (mandatory legal statement)

INVOLTEC is Qualiopi-certified (the French national quality certification for training providers) for training activities — certificate no. CAP0869, issued by CAPCERT (Cofrac-accredited body no. 5-0638), valid from 28/07/2025 to 02/08/2028 — training provider registration no. 11770428377. This certification allows its customers to use their vocational training entitlements and have their sessions funded by their OPCO.

Download our Qualiopi certificate (PDF) ↓

Three trainees in front of an overwrapping machine, one of them at the control panel
Illustration — Training takes place on the machine, in small groups of no more than three trainees.

Our training courses

Machine operation & settings

Getting to grips with MARDEN EDWARDS overwrapping machines, EFFYTEC HFFS machines, DM PACK lines (film, cardboard, palletising) and Sollas machines.

Format changeover & 1st-level maintenance

Team autonomy on batch changeovers and routine maintenance operations.

On site, in our workshop or remotely

Training delivered at your premises, at INVOLTEC’s premises, or remotely as required.

All these training courses are covered by INVOLTEC’s Qualiopi certification and can therefore be funded by OPCOs.

Why train your teams?

An overwrapping machine, an HFFS machine or a secondary packaging line only reaches its full potential if the teams who use it every day master its operation, settings and first-level maintenance. Training makes it possible to:

  • reduce breakdowns caused by incorrect use or incorrect setting of the machine;
  • become more autonomous on routine format changeovers;
  • ensure a safe, smooth start when a new team member or a new machine arrives.

Qualiopi certification makes funding by your company’s OPCO possible, depending on your sector and your training entitlements: something to check beforehand with your HR department or your OPCO adviser.

Sample programme: “Operating and setting an overwrapping machine”

Typical course delivered by INVOLTEC to make a team fully self-sufficient on an overwrapping machine, from routine operation to format changeover.

Overwrapping machine control panel: format management and seal settings screen, emergency stop
Photo — The control panel of an overwrapping machine: selecting, editing and creating formats, seal settings.
  • Know and apply the safety rules for using an overwrapping machine
  • Be able to calculate a film width and a film cut-off length according to the format configuration
  • Know, locate, remove and refit all the tooling parts
  • Master the steps and settings of a format changeover or a new format creation
  • Know the machine’s main operating modes (control panel, virtual cams...)
  • Be able to correct a fold defect and carry out the machine’s metrology independently
  • Know and apply the steps of first-level preventive maintenance

Target audience

Line managers, technicians, setters. No mandatory prerequisites; some prior familiarity with overwrapping is desirable.

Teaching methods

Hands-on work on the machine under real production conditions, written procedure document, practical exercises and quizzes. Assessment carried out during the practical exercises.

Group & duration

1- or 2-day modules, limited to a maximum of 3 trainees per session to prioritise hands-on machine practice — beyond that, the practical part would become counter-productive.

Location

At INVOLTEC’s premises (up to 3 participants, personal protective equipment required) or at the customer’s site, on their own overwrapping machine.

Monitoring & assessment

Attendance sheet signed per half-day and individual training certificate given to each trainee.

Trainers

INVOLTEC technical managers with several years’ experience in maintenance, retrofit and setting of overwrapping machines, specialised according to the machine’s sealing kinematics (rear-face or bottom-face sealing).

Pricing

The price of a session is made up of two elements: a tuition cost, based on the number of training days, and the trainer’s travel expenses. This price is independent of the number of trainees attending — a group deliberately limited to 3 people maximum, because our courses prioritise hands-on practice and are above all participative. Thanks to INVOLTEC’s Qualiopi certification, all or part of these costs can be funded by the customer’s OPCO, according to its own funding rules.

In 2025, more than 90% of trainees who attended an INVOLTEC course said they were “very satisfied” (100% when “satisfied” and “very satisfied” are combined, as in 2024).

Why train with INVOLTEC

Our trainers come from the shop floor and know the machines inside out: practical content focused on everyday tasks and settings, adapted to the trainees’ level — initial familiarisation or advanced training.

Accessibility and disability

Our training courses are open to people with disabilities. Any disability or particular need (mobility, hearing, sight, learning pace, adapted materials…) can be reported to our disability officer before the session: together with you and the trainee, we look at possible adjustments to the content, materials, pace or organisation of the course.

INVOLTEC is a partner of Ressource Handicap Formation (RHF) Île-de-France, an Agefiph scheme that helps training organisations welcome people with disabilities. When the adjustment needed goes beyond our own means, we call on it to find the most suitable solution with you.

To discuss this in confidence: +33 1 60 24 40 45 · contact@involtec.com, mentioning “accessibility” in your message.

Your details are used solely to respond to your request. See our privacy policy.

Financing / Leasing

An overwrapping machine is a long-term investment. Leasing lets you equip yourself without tying up your cash flow: the cost is spread over the machine’s period of use, with fixed rental payments.

Leasing finance covers new MARDEN EDWARDS machines and overhauled used machines from our fleet, both MARDEN EDWARDS and Sollas. The contract can include installation, tooling and training for your operators: your project is financed under a single contract, from delivery to production start-up.

Tell us which machine and the term you want: we send you the financing offer together with the quote, then follow up the application with the finance provider through to delivery.

Financing subject to approval of the application by the finance provider. Durations and conditions on request. EFFYTEC and DM PACK machines are not available on lease.

Online quote

Only your name and e-mail are required (*). The questions adapt to your need.

Your details are used solely to respond to your request. See our privacy policy.