📞 +33 (0)1 60 24 40 45 ✉️ contact@involtec.com Le Châtelet-en-Brie (77) — France
FREN

How to choose your overwrapping machine: a four-question method

Practical guide no. 5 · Published on 2 August 2026 · Frédéric Bussemey
INVOLTEC practical guide no. 5 — How to choose your overwrapping machine: a four-question method

An oversized machine is expensive and produces no better. An undersized machine becomes a bottleneck at the first increase in demand.

Start from the product, not the catalogue

Choosing an overwrapping machine is not just a matter of comparing maximum outputs.

Yet that is how most tenders begin: a comparison table, three columns, one row for “output” and one for “price”.

The problem is that these two rows say almost nothing about what the machine will actually cost and produce over ten years. Four questions, asked in this order, frame the choice properly.

Free access · all INVOLTEC practical guides

Read the rest of the guide

Enter your business contact details: you get immediate access to the whole of this guide and all INVOLTEC guides, on this device.

Coming up in the rest of the guide:

  • 1. What range of formats really needs to be covered?
  • 2. What output, and measured how?
  • 3. How many SKUs, and how often?
  • 4. Which acquisition method?
  • What people always forget to budget for
  • The most common mistakes
  • … and 2 more sections

INVOLTEC uses your data to give you access to the guides and to contact you again about solutions relevant to your business; you may object to this at any time. Your data is neither transferred nor sold. Privacy policy.

1. What range of formats really needs to be covered?

This is the deal-breaker criterion, and the one to address first.

Diagram of an overwrapped pack with its dimensions a, b and c
Diagram — Dimensions a, b and c of a format; the arrow shows the direction of travel.

Each machine range covers a given range of lengths, widths and heights. A narrow carton and a wide gift box do not belong on the same machine, and no option will make up for choosing the wrong range.

The right approach is to list not the current format, but all the formats planned over the next three years: existing SKUs, projects awaiting a decision, and planned limited editions and promotional gift boxes.

It is at this precise moment, and no other, that the cost of future format changeovers is decided. Widening the covered range when ordering involves a modest extra cost; changing it after installation often means replacing the machine.

2. What output, and measured how?

The effective output is that of the complete line, not of the overwrapping machine on its own.

A machine able to handle more products per minute than its upstream infeed will never reach its rated output. The limiting factor is almost always somewhere other than the overwrapping machine.

For any claimed output, three points must be clarified with the manufacturer:

  • with which product and which material was this output measured?
  • over what continuous period, and with what reject rate?
  • what output is contractually guaranteed, and on which format?

The output and format ranges of each machine range are given on the machine data sheets. They are a starting point, not an answer: only an application study carried out with your product can establish a design output.

3. How many SKUs, and how often?

A single-product line and a line running fifteen SKUs do not have the same priorities.

In the second case, format changeover time and tooling cost generally weigh more heavily on annual performance than rated output.

A simple calculation is enough to check this: multiply the number of format changeovers per year by their average duration, and compare the result with the theoretical gain from a higher output. On a short-run line, the first figure almost always wins.

This question also determines how demanding you need to be on the human–machine interface and on recipe storage: the more frequent the changeovers, the more the repeatability of settings becomes a selection criterion. Practical guide no. 8 details the levers for reducing format changeover time.

4. Which acquisition method?

New, used and rental machines meet different needs.

MARDEN EDWARDS TM100LH overwrapping machine
Photo — TM100LH overwrapping machine from the INVOLTEC fleet.
  • New, when the machine is the heart of a long-term line and the format range has to be custom-defined.
  • Overhauled used machines, to set up a second line, absorb growth or test a market without committing to the full investment.
  • Rental, for a temporary need, a seasonal peak or to replace a machine that is out of service.

Leasing is a fourth route, financial rather than technical: it spreads the cost without changing the choice of machine.

These options can be combined. A two-tier fleet — a new machine in continuous production, plus an additional used or rented machine — is often more economical than a single machine sized for the peak.

What people always forget to budget for

The machine price is only part of the real investment. Four items are regularly missing from initial budgets:

  • change parts, with one set per product size family;
  • the packaging material, whose web width and grammage depend on the machine as much as on the product — see practical guide no. 6;
  • training for operators and maintenance technicians, which can be funded under the Qualiopi certification (the French national quality certification for training providers);
  • the maintenance contract, to be scaled to the real criticality of the line.

On top of these come start-up consumables and the quantity of product needed for trials, which is often underestimated. Practical guide no. 9 details what to plan for between the order and the first pallet produced.

The most common mistakes

Choosing based on maximum output. It is measured under ideal conditions and rarely achievable in continuous production.

Defining the format range based on the current catalogue. Tomorrow’s SKUs will not fit, and widening the range afterwards costs much more.

Comparing bare machine prices. Without change parts, material, training and maintenance, the comparison is meaningless.

Leaving maintenance out of the decision. It is the maintenance technician, not the buyer, who will spot hard-to-reach components.

Overlooking format changeover time. On a short-run line, it weighs more heavily on annual performance than output does.

10 questions to ask before you sign

  1. What formats will you be producing in three years’ time, not today?
  2. Does the range covered by the machine leave a margin on those formats?
  3. With what product and what material was the stated output measured?
  4. What output is contractually guaranteed, and on which reference format?
  5. How many format changeovers will you carry out per year, and how long do they take?
  6. What does an additional set of change parts cost, and what is its manufacturing lead time?
  7. Which components are accessible without major dismantling?
  8. Has the maintenance department seen the machine before the decision is made?
  9. What is the total cost of ownership over five years, including machine, consumables and maintenance?
  10. What support is planned between commissioning and the ramp-up to full output?

Conclusion

Start from the product and its variability, not from the catalogue.

The format range determines the choice of machine range, the number of SKUs determines the weight of format changeovers, the real output determines sizing, and the acquisition method adapts it all to your financial situation.

A well-chosen machine is neither the fastest nor the cheapest. It is the one that will still be producing your SKUs in five years’ time, without unexpected reinvestment.

INVOLTEC practical guides

Get every new guide

A guide every three to four weeks, written by our technicians: machine selection, settings, tooling, regulations.

See all guides →
Article written by Frédéric Bussemey for INVOLTEC International. ← All practical guides