📞 +33 (0)1 60 24 40 45 ✉️ contact@involtec.com Le Châtelet-en-Brie (77) — France
FREN

EFFYTEC HB-20 PMP stand-up pouch machine

Effytec — Stand-up pouch machine, PMP version

← Back to the EFFYTEC range
EFFYTEC HB-20 PMP stand-up pouch machine
ConfigurationsSimplex · Duplex
Indicative output50 to 60 cycles/min, i.e. 50 to 60 pouches/min in simplex and 100 to 120 in duplex
Pouch size (width × height)Simplex 80-200 × 100-270 mm · duplex 60-100 × 100-270 mm
Pouch typesStand-up, delta, stand-up with zip, flat pouch with zip, 3- or 4-side-seal flat pouch, gusseted pouch, Euro hole (hanging), gusseted pouch with partial shaped cut, flat pouch with partial shaped cut, top spout (top valve), shaped pouch with top spout, shaped pouch (total shaped), corner spout (corner valve)
Filling stations1+1
Maximum volume per pouch1,500 cc
Power consumption15 kW
Compressed air consumption300 l/min
Overall dimensions (L × D × H)3,000 × 3,300 × 1,700 mm (recommended minimum installation length: 4,600 mm)

PMP (“pre-made pouch”) version of the HB-20 range, in simplex or duplex, for stand-up, delta, zip, gusseted, shaped or spouted pouches. Volume up to 1,500 cc. The machine fills and seals pre-made pouches.

  • Simplex or duplex, 1+1 filling stations
  • Shaped pouch and corner valve in both simplex and duplex
  • Pouch width up to 200 mm in simplex

Specifications given for guidance by EFFYTEC, depending on the product, film, format and machine configuration; they are confirmed when your project is studied. Footprint given as length × depth × height. Output in pouches/min: cycles/min multiplied by the number of lanes (duplex, triplex, quadruplex), as indicated by EFFYTEC.

A project with this model?

Describe your product, your formats and the target speed: we will come back to you with a suitable configuration and a quote.