📞 +33 (0)1 60 24 40 45 ✉️ contact@involtec.com Le Châtelet-en-Brie (77) — France
FREN

EFFYTEC HB-16 PMP stand-up pouch machine

Effytec — Stand-up pouch machine, PMP version

← Back to the EFFYTEC range
EFFYTEC HB-16 PMP stand-up pouch machine
ConfigurationsSimplex · Duplex
Indicative output50 to 60 cycles/min, i.e. 50 to 60 pouches/min in simplex and 100 to 120 in duplex
Pouch size (width × height)Simplex 80-160 × 100-270 mm · duplex 60-80 × 100-270 mm
Pouch typesStand-up, delta, stand-up with zip, flat pouch with zip, 3- or 4-side-seal flat pouch, gusseted pouch, Euro hole (hanging), gusseted pouch with partial shaped cut, flat pouch with partial shaped cut, top spout (top valve), shaped pouch with top spout; simplex only: shaped pouch (total shaped), corner spout (corner valve)
Filling stations1+1
Maximum volume per pouch1,000 cc
Power consumption10 kW
Compressed air consumption250 l/min
Overall dimensions (L × D × H)2,400 × 2,500 × 1,700 mm (recommended minimum installation length: 4,000 mm)

PMP (“pre-made pouch”) version of the HB-16 range, in simplex or duplex, for stand-up, delta, zip, gusseted or spouted pouches. Volume up to 1,000 cc, machine 2,400 mm long. The machine fills and seals pre-made pouches.

  • Simplex or duplex, 1+1 filling stations
  • Shaped pouch and corner valve in simplex
  • Machine length: 2,400 mm

Specifications given for guidance by EFFYTEC, depending on the product, film, format and machine configuration; they are confirmed when your project is studied. Footprint given as length × depth × height. Output in pouches/min: cycles/min multiplied by the number of lanes (duplex, triplex, quadruplex), as indicated by EFFYTEC.

A project with this model?

Describe your product, your formats and the target speed: we will come back to you with a suitable configuration and a quote.